ECPS Indicator Comes on, But There Is No Power Assist

Symptom Troubleshooting: ECPS indicator comes on, but there is no power assist

ECPS indicator comes on, but there is no power assist

- Hard steering

- Uneven or rough steering

1. Turn the ignition switch to ON (II).

Is there a clicking noise from the ECPS valve for 2 to 3 seconds?
YES - The ECPS system is OK at this time. Go to Symptom Troubleshooting. Symptom Troubleshooting

NO - Faulty ECPS control unit or the ECPS valve, replace the ECPS control unit Service and Repair or the valve housing and stepping valve motor. Overhaul