Low Oil Pressure Indicator Stays On

Low oil pressure indicator stays on

Diagnostic Procedure:

1. Check the engine oil level.

2. Do the low oil pressure indicator circuit troubleshooting procedure (Short). Low Engine Oil Pressure Indicator Circuit Troubleshooting (Short)

3. Test the oil pressure switch. Testing and Inspection

4. Check the engine oil pressure. Testing and Inspection

5. Check the oil filter for clogging.

6. Check the oil screen for clogging.

7. Check the relief valve. Service and Repair

8. Test the oil pump. Service and Repair

Also check for:

- A wire shorted to ground between the powertrain control module (PCM) and the oil pressure switch