Set Speed Does Not Cancel When the Cancel Button Is Pressed (Without ACC/CMBS)

Set speed does not cancel when the cancel button is pressed

Diagnostic Procedure:

1. Check for PGM-FI and body DTCs.

2. Do the cruise control input test. Cruise Control Input Test (Without ACC/CMBS)

3. Test the cruise control cancel switch signal input.

4. Do the cruise control combination switch test. Cruise Control Combination Switch Test/Replacement (Without ACC/CMBS)

Also check for:

- Open circuit, loose or disconnected terminals: GRN/YEL, GRY, YEL/WHT, or LT GRN