Seat Fan: Testing and Inspection

Ventilated Seats Fan Motor Test

1. Remove the driver's or front passenger's seat, Front Seat Removal/Installation then remove the seat-back cover. Front Seat-Back Cover Replacement

2. Disconnect the 3P connector (A) from each fan motor (B).

Seat Cushion





Seat-back





3. Connect battery power to fan motor 3P connector terminal No. 3 and ground terminal No. 1. The motor should run.

4. If the motor does not run or fails to run smoothly, replace the motor.
- Seat cushion motor. Service and Repair

- Seat-back motor. Service and Repair