Front Passenger's Power Seat Motor Test

Front Passenger's Power Seat Motor Test

1. Remove the front passenger's seat. Front Seat Removal/Installation
NOTE: For recline motor test only, remove the seat-back cover. Front Seat-Back Cover Replacement

2. Disconnect the connector from the each power seat motor.











3. Test each motor by applying battery voltage and body ground to the table. When the motor stops running, disconnect battery power immediately.

4. If the motor does not run or fails to run smoothly, replace the motor.
- Slide motor Front Seat Slide Motor Replacement

- Front up-down motor Front Seat Up-Down Motor Replacement

- Rear up-down motor Front Seat Up-Down Motor Replacement

- Recline motor Front Seat Recline Motor Replacement