Rear Seat Head Restraint Cover/Pad Replacement

Rear Seat Head Restraint Cover/Pad Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the head restraint. Rear Seat Head Restraint Replacement

2. Unzip the head restraint cover (A), pull it back, and remove it.






3. Separate the double-sided adhesive tapes (A), then remove the head restraint pad (B) and the head restraint pad molding (C) from the head restraint frame (D).

4. Scrape off the remaining double-sided adhesive tape from the head restraint frame, then clean its surface with a shop towel dampened with isopropyl alcohol.

5. Install the cover and pads in the reverse order of removal.