LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Automatic HVAC System (4-CYL) >> Climate Control >> Climate Control Unit Removal/Installation

Climate Control Unit Removal/Installation

  1. Remove the passenger's dashboard trim (see PASSENGER'S DASHBOARD TRIM REMOVAL/INSTALLATION )
  2. Remove the center console panel (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION )
  3. Remove the driver's center console trim and passenger's center console trim (see CENTER TRIM REMOVAL/INSTALLATION )
  4. Remove the self-tapping screws Disconnect the connectors (A), then remove the climate control unit(B)
    Fig 1: Identifying Climate Control Unit Connectors
    G05994738Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. If necessary, replace the bulbs (A) A
    Fig 2: Identifying Bulbs
    G05994739Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the control unit in the reverse order of removal After installation, operate the various functions to make sure they work properly
  7. Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITH THE HDS )
scientia non olet · About LEMON Manuals