Seat Side Bolster

SRS components are located in this area Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the, precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service

1. Remove the seat cushion
2. Remove the bolt securing the seat side bolster (A)
   Fig 1: Seat Side Bolster With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Fold the seat-back forward
4. Lift the seat side bolster (A) up to release the hooks (B), then remove the seat side bolster
   Fig 2: Identifying Seat Side Bolster And Hooks

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Install the seat in the reverse order of removal, and note these items
   • Guide the belts over the front of the seat side bolster as you install the bolster
   • Before attaching the seat side bolster, make sure there are no twists or kinks in the seat belts