Rearview Mirror Replacement
- Slide the rearview mirror harness upper cover (A) forward to release it from the headliner (B) Pry out the rearview mirror harness lower cover (C) to detach the hooks (D), then slide the lower cover rearward, and remove the lower cover by detaching the hooks (E) on the rearview mirror harness cover base (F)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Disconnect the connector (A)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Using a TORX T20 bit, loosen the screw, then slide the rearview mirror (A) rearward and off the mount (B)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the mirror in the reverse order of removal, and note these items
- Before installing the mirror, remove the TORX screw, and apply medium strength liquid thread lock to it
- Make sure the connector is plugged in properly