LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System (4-CYL) >> Immobilizer-keyless Control Unit Replacement

Immobilizer-keyless Control Unit Replacement

  1. Remove the driver's dashboard undercover (see DRIVER'S POCKET REMOVAL/INSTALLATION ), then remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION )
  2. Remove the steering column covers (see COLUMN COVER REMOVAL/INSTALLATION )
  3. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B)
    Fig 1: Identifying Immobilizer-Keyless Control Unit
    G05995191Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws and the immobilizer-keyless control unit
  5. Install the immobilizer-keyless control unit in the reverse order of removal
  6. After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION ), and make sure the immobilizer system works properly
  7. Program all of the client's keys/keyless transmitters (see IMMOBILIZER KEY REGISTRATION )
scientia non olet · About LEMON Manuals