LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Turn Signal/Hazard Warning Lights (4-CYL) >> Side Turn Signal Light Replacement

Side Turn Signal Light Replacement

  1. Remove the mirror holder (see MIRROR HOLDER REPLACEMENT )
  2. Remove the screws and the visor (A)
    Fig 1: Identifying Side Turn Signal Light And 2P Connector
    G05994987Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull out the side turn signal light (B), then disconnect the 2P connector (C) from it
  4. Install the light in the reverse order of removal