Passenger's Dashboard Trim Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Acura Tool and Equipment Program, call 888-424-6857

NOTE:

Take care not to scratch the dashboard and its related parts
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components

Remove the passenger's dashboard trim (A)
1. Open the grove box
2. Pull out on the bottom edge of the trim by hand
3. Detach the clips along the trim.
  
  Fig 1: Identifying Passenger's Dashboard Trim
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items
- If the clips are damaged or stress-whitened, replace them with new ones
- Push the clips into place securely