LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> FENDERWELL (4-CYL) >> Fuel Pipe Protector Replacement

Fuel Pipe Protector Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the body
  1. Remove the left rear wheel (see HUB BEARING UNIT REPLACEMENT )
  2. Remove the clips, then remove the fuel pipe protector (A)
    Fig 1: Identifying Fuel Pipe Protector Clips
    G05994551Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the protector in the reverse order of removal, and note these items
scientia non olet · About LEMON Manuals