Rear License Trim Replacement

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Acura Tool and Equipment Program, call 888-424-6857

NOTE:

Take care not to scratch the trunk lid
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components

Pull the rear license trim (A) out to detach the clips, then remove the trim

Fig 1: Identifying Rear License Trim Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items

If the clips are damaged or stress-whitened, replace them with new ones
Push the clips into place securely