LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TL Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head (J35Z6) >> Timing Belt Drive Pulley Replacement

Timing Belt Drive Pulley Replacement

  1. Remove the timing belt (see TIMING BELT REMOVAL )
  2. Remove the timing belt stopper (A), then remove the timing belt drive pulley (B) and the key (C)
    Fig 1: Identifying Timing Belt Drive Pulley And Key
    G05986758Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Inspect the timing belt drive pulley and the key for damage If it is cracked or damaged, replace the timing belt drive pulley
  4. Install the new timing belt drive pulley and the key, then install the timing belt stopper
  5. Install the timing belt (see TIMING BELT INSTALLATION )
  6. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN )
scientia non olet · About LEMON Manuals