A/T Transfer Hypoid Drive Gear Bearing Replacement

A/T Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required

- Driver 07749-0010000
- Attachment, 42 x 47 mm 07746-0010300
- Attachment, 40 x 50 mm 07LAD-PW50601
1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver, the attachment (42 x 47 mm), bearing separator (C) and the press.






2. Install the new tapered roller bearing (A) on the transfer hypoid drive gear (B) using the driver, the attachment (42 x 47 mm), the attachment (40 x 50 mm), and the press.