Transmission Housing Intermediary Shaft Bearing Replacement

Transmission Housing Intermediary Shaft Bearing Replacement

Special Tools Required

- Bearing remover shaft 07936-3710600
- Remover handle 07936-3710100
- Weight, remove 07741-0010201
- Driver 07749-0010000
- Attachment, 37 x 40 mm 07746-0010200
1. Remove the intermediary shaft bearing from the transmission housing using the bearing remover shaft set (20 mm), the bearing shaft handle, and the sliding hammer weight.






2. Install the new bearing until it bottoms in the transmission housing using the driver and the attachment (37 x 40 mm).