Fog Light/Daytime Running Light Bulb Replacement

Fog Light/Daytime Running Light Bulb Replacement

1. Remove the inner fender. Front Inner Fender Replacement

2. Disconnect the 2P connectors (A) from the fog lights/daytime running lights (B).





3. Turn the fog light bulb socket (C) and the daytime running light bulb socket (D) 45 ° counterclockwise to remove them from the housing.

4. Install new bulb(s) in the reverse order of removal.
Make sure the bulb(s) are fully sealed in the housing and locked into place.

NOTE: Do not touch the glass of the bulb with your hands. If necessary, clean the glass area with alcohol.