Trunk / Liftgate Latch: Service and Repair

Tailgate Latch Replacement

Without Power Tailgate

- Put on gloves to protect your hands.

- If the tailgate latch can't be unlocked by using the keyless entry transmitter or the inside/outside tailgate switches, or by unlocking the driver's door lock, remove the maintenance lid (A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.





1. Remove the tailgate lower trim panel.

2. Disconnect the tailgate latch switch connector (A) and tailgate actuator connector (B).

3. Remove the bolts.






4. Pull the tailgate latch (A) out, then remove it.

5. Install the latch in the reverse order of removal, and note these items:
- Make sure the connectors are plugged in properly.

- Make sure the tailgate opens properly and locks securely.