Fuel Door Switch: Service and Repair

Fuel Fill Door Opener Switch Test/Replacement

NOTE: Before testing, check the B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Remove the driver's door panel.

2. Disconnect the 5P (or 7P)* connector (A) from the fuel fill door opener switch (B).
*: With power tailgate

3. Check for continuity between the terminals No. 1 and No. 2.
- There should be continuity with the switch pressed.

- There should be no continuity with the switch released.

4. If the continuity is not as specified, replace the switch.