Symptom Troubleshooting

Symptom Troubleshooting: Wireless remote control does not work (source select buttons)

Wireless remote control does not work (source select buttons)

NOTE:

- Check the wireless remote control battery condition first.

- You need to switch the audio unit REAR PWR button on for the rear display, remote controls, and sound to operate.

1. Check the wireless remote control operation.

Does the source select button operate?
YES - Operation is normal at this time.

NO - Go to step 2.


2. Check the diagnosis menu 1 CONNECT status of the rear entertainment system self-diagnostic. Initial Inspection and Diagnostic Overview

Is the device connect condition OK?
YES - Replace the wireless remote control.

NO - Repair the connection for the device that has a connection error indicated.