Manufacturer Code Charts: 48

VSA DTC Troubleshooting: 45, 46, 47, 48

DTC 45, 46, 47, 48: VSA Solenoid

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

4. Check for DTCs with the HDS.

Is DTC 45, 46, 47, and/or 48 indicated?
YES - Replace the VSA modulator-control unit. Service and Repair

NO - Intermittent failure, the system is OK at this time. Check for a loose connection at G303.