Chain Case Oil Seal Installation

Special Tools Required 

• Driver 07749-0010000
• Attachment, 52 x 55 mm 07746-0010400

1. Use the special tools to drive a new oil seal squarely into the chain case to the specified installed height.
   Fig 1: Driving Oil Seal Squarely Into Chain Case

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Measure the distance between the chain case surface and oil seal.

   Oil Seal Installed Height: 

   33.0-33.7 mm (1.30-1.33 in.) 

   Fig 2: Identifying Distance Between Chain Case Surface And Oil Seal

   Courtesy of AMERICAN HONDA MOTOR CO., INC.