Front Fender Trim Replacement

NOTE: Take care not to scratch the fender trim and body.

Using a clip remover, remove the clips.

Fig 1: Identifying Front Fender Trim And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the washer mouth (A) from the washer tank (B). Release the hook (C), then remove the front fender trim (D) and the washer mouth.

Fig 2: Identifying Washer Mouth, Washer Tank, Hook And Front Fender Trim
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the fender trim in the reverse order of removal, and note these items:
- Replace the clips (A) with new ones.
- Push the clips into place securely.
  
  Fig 3: Identifying Front Fender Trim Clips
  Courtesy of AMERICAN HONDA MOTOR CO., INC.