LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Gauge Control Module Replacement >> Speedometer

Gauge Control Module Replacement: Speedometer

  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Remove the three screws from the gauge control module (speedo) (A).
    Fig 1: Identifying Gauge Control Module (Speedo) 36P Connector
    G06268854Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 12P connector (B) from the gauge control module (speedo).
  4. Install the gauge in the reverse order of removal.
scientia non olet · About LEMON Manuals