LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2008 >> MDX >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Battery >> Battery Terminal Disconnection and Reconnection >> Disconnection

Battery Terminal Disconnection and Reconnection: Disconnection

NOTE: Some systems store data in memory that is lost when the battery is disconnected. Do the following steps before disconnecting the battery.
  1. Make sure you have the anti-theft code(s) for the audio and/or the navigation system (if equipped).
  2. Write down the audio the presets (AM and FM), and the XM audio presets (if equipped), because the audio unit dose not retain the presets after the battery is disconnected.
  3. Make sure the ignition switch is in LOCK (0).
  4. Disconnect and isolate the negative cable from the battery.
    NOTE: Always disconnect the negative cable from the battery first.
  5. Disconnect the positive cable from the battery.