No Display Appears on the Rear Controller Indicator

No display appears on the rear controller indicator

NOTE: You need to switch the audio unit REAR PWR button on for the rear display, remote controls, and sound to operate.

1. With the ignition switch to ON (II), push the rear power switch ON to see if the screen turns ON.

Does the screen come on?

YES - Operation is normal at this time.

NO - Go to step 2.

2. Check the operation and display of the screen, the wireless remote control and the wireless headphone.

Are the operation and display normal?

YES - Faulty rear indicator.

NO -
- Screen faulty: Go to the Black picture is shown on the display troubleshooting.
- Wireless remote control faulty: Go to the Wireless remote control does not work (all buttons) troubleshooting.
- Wireless headphone faulty: Go to the Wireless headphone sound is weak, distorted, volume does not change, or there is no sound in all modes troubleshooting.