LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> TL V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Rocker Arm Assembly >> Service and Repair >> Removal and Replacement >> Rocker Arm Assembly Removal

Rocker Arm Assembly Removal

Rocker Arm Assembly Removal
1. Remove the cylinder head cover.
2. Loosen the adjusting screws (A).





3. Remove the bolts and the rocker arm assembly.
-1 Loosen the rocker shaft mounting bolts two turns at a time, to prevent damaging the valves or rocker arm assembly.
-2 When removing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and the rocker arms on the shafts.




scientia non olet · About LEMON Manuals