LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Remove the six ignition coils (see IGNITION COIL REMOVAL/INSTALLATION ).
  3. Remove the three bolts (A) securing the harness holder, and remove the dipstick (B).
    Fig 1: Removing Harness Holder And Dipstick
    G05494019Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the bolt (A) securing the power steering hose clamp.
    Fig 2: Identifying Power Steering Hose Clamp And Harness Holder Bolts
    G05494020Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the two bolts (B) securing the harness holder.
  6. Remove the breather hose (C).
  7. Remove the cylinder head covers. FRONT

    FRONT 

    Fig 3: Identifying Cylinder Head Cover (Front)
    G05494021Courtesy of AMERICAN HONDA MOTOR CO., INC.

    REAR 

    Fig 4: Identifying Cylinder Head Cover (Rear)
    G05494022Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals