LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> MDX >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front Bulkhead Cover Replacement

Front Bulkhead Cover Replacement

NOTE: Take care not to scratch the front bumper and body.
  1. Remove the front bulkhead cover (A).
    1. Remove the clips.
    2. Pass the hood latch knob (B) through the hole in the cover.
      Fig 1: Identifying Front Bulkhead Cover
      G05487451Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the cover in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.
scientia non olet · About LEMON Manuals