LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> MDX V6-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Removal and Replacement >> Shift Lever Knob Replacement

Shift Lever Knob Replacement

Shift Lever Knob Replacement
1. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.





2. Remove the screws (A) and remove the shift lever knob (B).





3. Apply non-hardening thread lock sealant to the screw threads.
4. Install the new shift lever knob, and secure it with the screws.
5. Slide the shift lever boot ring over the shift lever knob until it snaps on.
scientia non olet · About LEMON Manuals