VSA (Vehicle Stability Assist)

DTC 31, 32, 33, 34, 35, 36, 37, 38: ABS Solenoid

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Check for DTCs with the HDS.

Is DTC 31, 32, 33, 34, 35, 36, 37, and/or 38 indicated?

YES-Replace the VSA modulator-control unit.

NO-intermittent failure, the system is OK at this time. Check for a loose connection at G303.