LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2006 >> TL Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the six ignition coils (see IGNITION COIL REMOVAL/INSTALLATION ).
  3. Remove the three bolts (A) securing the harness holder, and remove the dipstick (B).
    Fig 1: Identifying Bolts (A) And Dipstick (B)
    G03658893Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the bolt (A) securing the power steering hose bracket.
    Fig 2: Identifying Power Steering Hose Bracket Bolt (A), Harness Holder Bolts (B) And Breather Hose (C)
    G03658894Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the two bolts (B) securing the harness holder.
  6. Remove the breather hose (C).
  7. Remove the cylinder head covers.

    FRONT: 

    Fig 3: Removing Cylinder Head Cover - Front
    G03658895Courtesy of AMERICAN HONDA MOTOR CO., INC.

    REAR: 

    Fig 4: Removing Cylinder Head Cover - Rear
    G03658896Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals