LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

  1. Remove the engine cover.
    Fig 1: Identifying Intake Manifold Cover
    G05490099Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the four ignition coils (see IGNITION COIL REMOVAL/INSTALLATION ).
  3. Remove the two bolts (A) securing the vacuum line.
    Fig 2: Identifying Vacuum Line Bolts
    G05490100Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the bolt (B) securing the power steering (P/S) hose bracket.
  5. Remove the dipstick (C) and disconnect the breather hose (D).
  6. Remove the cylinder head cover.
    Fig 3: Identifying Cylinder Head Nuts
    G05490101Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals