LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Driveline/Axle >> Intermediate Shaft Removal

Intermediate Shaft Removal

  1. Drain the transmission fluid. Reinstall the drain plug with a new washer:
  2. Remove the right driveshaft (see DRIVESHAFT REMOVAL  ).
  3. Remove the flange bolt (A) and two dowel bolts (B).
    Fig 1: Identifying Flange Bolt And Dowel Bolts
    G05491767Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontally until it is clear of the differential to prevent damaging the differential oil seal (B).
    Fig 2: Identifying Intermediate Shaft And Differential Oil Seal
    G05491768Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals