Front Fender Trim Replacement

NOTE: Take care not to scratch the body.

Remove the front fender trim (A).
1. Using a clip remover, remove the clip (B) securing the front fender trim and cowl cover (C).
2. Remove the clips (D) from the front bulkhead cover (E).
3. Pull up the side edge of the front bulkhead cover, then pull up the front fender trim to release the clips (F), and release the hook (G) from the body.
  
  Fig 1: Removing Front Fender Trim
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clip portions into place securely.