Driver's Outer Dashboard Trim Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the dashboard and related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

Pry up on the outside edge of the driver's outer dashboard trim (A) with a trim tool to detach the clips, then remove the trim.

Fig 1: Identifying Driver's Outer Dashboard Trim Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and push the clips into place securely.