Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the dashboard and related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

Adjust the steering column upward.
Remove the screw (A). Gently pull out on the lower edge of the dashboard lower cover (B) to detach the clips (C) and hooks (D).

Fig 1: Identifying Lower Edge Of Dashboard Lower Cover Clips And Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cover in the reverse order of removal.