Front Fender Fairing Replacement

Remove the front inner fender as needed (see FRONT INNER FENDER REPLACEMENT ).
Open the front door. Remove the upper clip, and from inside the door, remove the lower clip securing the front fender fairing (A) and front fender (B).

Fig 1: Identifying Lower Clip Securing Front Fender Fairing And Front Fender
Courtesy of AMERICAN HONDA MOTOR CO., INC.
From the wheel arch, release the clips.

Fig 2: Identifying Wheel Arch Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the front fender fairing (A).

Fig 3: Identifying Front Fender Fairing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the fender fairing in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Before installing the clips in the door opening area, install the front fender fairing (A) to the front fender (B) properly as shown.
- Push the clips into place securely.
  
  Fig 4: Identifying Front Fender Fairing
  Courtesy of AMERICAN HONDA MOTOR CO., INC.