Audio-HVAC Display Panel Removal/Installation

Remove the audio-HVAC display module (see AUDIO-HVAC DISPLAY MODULE REMOVAL/INSTALLATION ).
NOTE: Eject all the CDs before disconnecting the audio unit and CD changer to prevent damaging the CD player's load mechanism.
Remove the mounting screws and audio unit (A) from the radio bracket (B), and separate the audio unit from the audio-HVAC display panel (C).
With Navigation

Fig 1: Identifying Mounting Screws, Audio Unit And Radio Bracket (With Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Without Navigation

Fig 2: Identifying Mounting Screws, Audio Unit And Radio Bracket (Without Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio unit and audio-HVAC display module in the reverse order of removal.