SRS Unit Inputs and Outputs at Connector A (28P)
'06-08 models
SRS UNIT CONNECTOR TERMINALS REFERENCE
| Terminal Number | Wire Color | Terminal Name | Description |
|---|---|---|---|
| 1 | GRN/YEL | LA2+ | Power source for driver's airbag second inflator |
| 2 | GRN/WHT | LA2- | Ground for driver's airbag second inflator |
| 3 | BLU/BLK | RA2+ | Power source for front passenger's airbag second inflator |
| 4 | BLU/RED | RA2- | Ground for front passenger's airbag second inflator |
| 7 | GRN/BLK | LA1 + | Power source for driver's airbag first inflator |
| 8 | GRN/RED | LA1- | Ground for driver's airbag first inflator |
| 9 | YEL | RA1+ | Power source for front passenger's airbag first inflator |
| 10 | BLU/YEL | RA1- | Ground for front passenger's airbag first inflator |
| 15 | BRN/YEL | LFS- | Ground for left front impact sensor |
| 16 | BRN | RFS- | Ground for right front impact sensor |
| 17 | WHT | VA | SRS system sub power (common with OPDS/ODS) |
| 18 | WHT/RED | VB | SRS dedicated power (dedicated booster circuit) |
| 19 | PNK | IDC | SRS warning indicator output line |
| 20 | BLU/RED | PTT | Passenger's airbag cutoff indicator output line |
| 21 | YEL | CDS | Front passenger's occupant detection signal output line |
| 22 | BLK | SRS GND (1) | Ground circuit for the SRS |
| 23 | BLK | SRS GND (2) | Ground circuit for the SRS |
| 24 | BLU | K-LINE | Sends and receives scan tool signal |
| 25 | LT GRN/ BLK | MES | Memory erase signal input |
| 26 | BRN | SCS | Service check signal input |
| 27 | RED | LFS+ | Power source for left front impact sensor |
| 28 | GRN | RFS+ | Power source for right front impact sensor |