LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> SRS (Supplemental Restraint System) >> OPDS/ODS Unit Replacement >> Removal

OPDS/ODS Unit Replacement: Removal

  1. Disconnect the negative cable from the battery, then wait for 3 minutes before starting work.
  2. Disconnect the front passenger's side airbag harness 2P connector (see step  3 ).
  3. Remove the front passenger's seat assembly (see FRONT SEAT REMOVAL/INSTALLATION ) and seat-back cover (see FRONT SEAT COVER REPLACEMENT ).
  4. Remove the cover (A), then disconnect the OPDS unit 8P/ODS unit 18P connector (B) and sensor connectors (C) from the OPDS/ODS unit (D).
    Fig 1: Identifying OPDS Unit 8P/ODS Unit 18P Connector, Cover And Sensor Connectors
    G05489836Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the two screws (E) and the OPDS/ODS unit.
scientia non olet · About LEMON Manuals