DTC 31, 32, 33, 34, 35, 36, 37, 38: ABS Solenoid
- Turn the ignition switch ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch OFF, then turn it ON (II) again.
- Check for DTCs with the HDS.
Is DTCs 31, 32, 33, 34, 35, 36, 37, or 38 indicated?
YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ), and retest.
NO - The system is OK at this time. Refer to INTERMITTENT FAILURES .