LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood >> Hood Seal Replacement

Hood Seal Replacement

  1. Using a clip remover, detach the clips, then remove the hood seal (A) and hood corner seals (B). Take care not to scratch the hood.
    Fig 1: Identifying Hood Seal And Hood Corner Seals
    G05492524
  2. Install the seals in the reverse order of removal, and check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
scientia non olet · About LEMON Manuals