LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Fuel Fill Door >> Fuel Fill Door Adjustment

Fuel Fill Door Adjustment

  1. Slightly loosen the hinge mounting bolts (A).
    Fig 1: Fuel Fill Door Adjustment By Loosening Hinge Mounting Bolts
    G05492532
  2. Adjust the fuel fill door (B) in or out until it's flush with the body, and up or down as necessary to equalize the gaps.
  3. Tighten the hinge mounting bolts.
  4. Check that the fuel fill door opens properly and locks securely, and check that the rear of the door is flush with the body.
  5. Apply multipurpose grease to each location indicated by the arrows.
    Fig 2: Applying Multipurpose Grease To Fuel Fill Door
    G05492533
  6. Apply touch-up paint to the hinge mounting bolts and around the hinges.
scientia non olet · About LEMON Manuals