Rear Door Hook Pin and Catch Replacement

With a TORX T40 bit, remove the door hook pin (A) from the door.

Fig 1: Door Hook Pin From Door W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With a TORX T40 bit, remove the bolts, then remove the door catch (A) from the body.

Fig 2: Door Catch From Body W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the hook pin and catch in the reverse order of removal, and apply medium strength type liquid thread lock to the threads of the door hook pin.