LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Front Bumper Side Cover Replacement >> '06-08 Models

'06-08 Models

NOTE:
  • Put on gloves to protect your hands.
  • Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Take care not to scratch the front bumper.
  1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION  ).
  2. From the back of the front bumper (A), release the hooks (B), and pull out the front bumper side cover (C).
    Fig 1: Pulling Out Front Bumper Side Cover
    G05492520Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the cover in the reverse order of removal, and push the hooks into place securely.
scientia non olet · About LEMON Manuals