LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Front Bumper Removal/Installation >> '04-05 Models

'04-05 Models

NOTE:
  • Have an assistant help you when removing and installing the front bumper.
  • Take care not to scratch the front bumper and body.
  • Put on gloves to protect your hands.;
  1. Remove the front bumper as shown.
  2. Install the bumper in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Make sure the front bumper engages the hooks of the side spacers and upper beams on both sides securely.
      Fig 1: Removing Front Bumper w/Torque Specification
      G05492513Courtesy of AMERICAN HONDA MOTOR CO., INC.