Front Bumper Lower Grille Replacement

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Put on gloves to protect your hands.
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
Take care not to scratch the front bumper.

Remove the front bumper, '04-05 models (see '04-05 MODELS ), '06-08 models (see '06-08 MODELS ).
Remove the license plate.
Remove the screw (A), and bolts (B), then remove the license plate base (C) from the front bumper (D).

Fig 1: Removing License Plate Base From Front Bumper w/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
From the back of the front bumper (A), remove the screws securing the from the front bumper lower grille (B).

Fig 2: Removing Screws Securing From Front Bumper Lower Grille
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Detach the hooks (A) on the bottom of the front bumper lower grille (B), and pull out the grille.

Fig 3: Detaching Hooks On Bottom Of Front Bumper Lower Grille
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the grille in the reverse order of removal, and note these items:
- Push the hooks into place securely.
- Release the speed nuts with new ones.