LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Heaters >> Seat Heater Test >> Front Passenger's Seat

Front Passenger's Seat

  1. Remove the passenger's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the 4P connector (A) from the seat heater.
    Fig 1: Identifying Seat Heater 4P Connector Terminal
    G05493023
  3. Check for continuity between the No. 2 and No. 3 terminals, and No. 3*1 (No. 1)*2 and No. 4*1 (No. 2)*2 terminals of the 4P connector. There should be continuity.

    * 1:'04-05 models

    * 2:'06-08 models

  4. If the continuity is not as specified, replace the seat heater.